Recent Tweets

How To Install X360USB PRO Windows Drivers

How To Install X360USB PRO Windows Drivers

Last Updated: April 8, 2011 9:36 pm 0 comments

This guide will allow you to install your USB drivers on a windows based machine.

X360USB PRO Install Guide

1: Download the latest drivers from

2: Extract the driver files from the .zip file

3: Make sure the switch on the X360USB is set to the OFF position (ON = bootloader mode, used for updating the X360USB)

4: Connect the provided USB cable to the X360USB and your PC

– The extra AUX power cable is only to be used if your USB ports do not output 500mA
– In this case, you use both cables to power the X360USB
– 99% of computers operate at 500mA so it will be very rare to use this cable.

Some of the driver files will now install automatically. Once finished, the remaining driver has to be installed manually.

5: Open device manager, Right-Click on X360USB PIO, and choose Update Driver Software…

6: Browse your computer for the driver files you extracted in step 2

7: Click Next

8: Ignore the Windows security warning, and choose to install the driver software anyway

9: Double check in Device Manager, to see that the driver installed correctly.

Have fun

Source [teamexecuter]

The following two tabs change content below.


Web Developer
Senior Web Developer who combines passionate coding skills, strategic vision with strong hands on leadership and enormous personal drive. I create re-usable industry standard code that is used time and time again, producing outstanding results for every project I work on! I also like Classic Motorbikes, Quad bikes, Downhill Mountain biking & Learning electronics using the Arduino.

Latest posts by Marty (see all)